Sables Belts

Specializing in the research and development, production, sales and service of rubber synchronous belts and industrial belts.

About Us

Jiangxi Kangqi Industry Co., Ltd. is a high-tech manufacturer specializing in Rubber synchronous belts and special belts production, research, and development. We have our famous brand SABLES, KML which is well-known by customers all over the world. And we are also the agency of Japan Bando Belts.
Our main products include rubber synchronous belts, double-sided belts, coated feeding belts, flat belts, ribbed belts, tooth-ribbed belts, polyurethane timing belts, conveyor belts and synchronous belt wheels, fish-separation belts, endless belts for high-speed packing and printing machines, nut-shell belt...

View More
Shanghai Sables Transmission System Co., Ltd.
  • Shanghai Sables Transmission System Co., Ltd.
    2003

    Established

  • Shanghai Sables Transmission System Co., Ltd.
    20000

    Factory area

  • Shanghai Sables Transmission System Co., Ltd.
    5000+

    many kinds of specification

  • Shanghai Sables Transmission System Co., Ltd.
    21

    years of experience

APPLICATION

The products are widely used in printing, textiles, wood, wire and cable, food, home appliances, shoes, ceramics, logistics, papermaking, packaging, mining transportation, tobacco, sports equipment, and other industries.

Shanghai Sables Transmission System Co., Ltd.
Latest News

Click Out Our Latest News

  • Characteristics of high profile circular tooth synchronous belt tooth profile compared to conventional circular tooth synchronous belt tooth profile. Introduction: This kind of high-toothed arc tooth synchronous belt tooth profile has the following main features compared with the traditional arc tooth synchronous belt tooth profile: (1) The height of the synchronous belt tooth is 14.75% larger than that of the traditional STPD arc tooth, which increases the contact area between the belt tooth and the gear tooth as well as the meshing pressure angle, thus improving the same under the condition of the same unit load bearing strength. This kind of high tooth arc tooth synchronous belt tooth profile and the traditional arc tooth synchronous belt tooth profile compared with the following main features: (1) synchronous belt tooth profile and the traditional arc tooth synchronous belt tooth profile have the following main features. (1) synchronous belt tooth height than the traditional STPD arc tooth height is 14.75% larger, increasing the contact area between the belt teeth and gear teeth and meshing pressure angle, thus increasing the synchronous belt load carrying capacity under the condition of the unit load carrying strength remains unchanged. (2) The height of the teeth of the synchronous belt is 6.06% larger than the height of the gear teeth, to reduce the pressure between the groove of the belt teeth and the top of the gear teeth, improve the wear condition between the teeth of the belt and the stress condition of the bearing layer, and increase the life of the belt. (3) The four grooves on the top of the teeth of the synchronous belt can remove the air when the belt meshes with the wheel and reduce the noise, and at the same time, the grooves can also deform the top of the teeth and form the elastic top of the teeth, which can reduce the impact of meshing and improve the meshing condition. Conclusion (1) Through calculation and simulation, this paper analyzed and compared the design profile of the new high-tooth synchronous belt with the belt wheel tooth profile according to the belt wheel tooth profile (i.e., the belt's calculated tooth profile), and found that one of the matches is very ideal, and the design profile of the belt wheel with the belt tooth profile according to the belt's tooth profile (i.e., the belt wheel's calculated tooth profile) also coincides with the design of the belt wheel tooth profile, which indicates that the new high-tooth synchronous belt with the belt wheel's designed tooth profile is reasonable, and can achieve the close fit during transmission. This shows that the design profile of the new high-tooth synchronous belt and the pulley is reasonable and can achieve a close fit during transmission. (2) From the drawing of the total reel tooth profile can be seen, the belt mold hob and the belt wheel hob tooth profile of the transition curve do not appear sharp corners, and the eye tooth profile smooth and continuous, the processing process to avoid the phenomenon of ten involved or root cut. (3) Through the dynamic simulation of the transmission process can be visualized to qualitatively analyze the synchronous belt drive incomplete meshing process of meshing ten.

    View More 2024-01-08
  • Synchronous belt with synchronous pulley it is to replace the traditional triangle belt with a V pulley and chain with sprocket transmission inevitable products, synchronous belt with synchronous pulley transmission is tooth and tooth hold together for precision cooperation, no sliding gap, transmission is smooth, with accurate transmission ratio, but also shock absorption, low noise, to achieve the accurate automation control, transmission ratio range, can reach 1:10 but also can achieve the second level of transmission, the application is flexible. Allow line speed up to 40m / s, 5000-1000 / min turn (individual tooth type, such as 5GT, 8YU), high transmission efficiency, generally up to 98% -99%, the transfer of power from a few watts to hundreds of kilowatts, small tension, no lubrication, non-polluting, easy to replace, and the same time, in the current market after the basic localization of the PU (polyurethane) synchronous belts, the use of a wider range of applications, especially in the ceramic and glass industry. Square tooth synchronous belt is divided into: the lightest MXL, ultra-light XXL (the current market has not been widely used), special light XL, light L, heavy H, special heavy XH, ultra-heavy XXH, a total of seven, these are the widely used in the current market. Special tooth-type synchronous belt is divided into: the lightest T2.5, light T5, heavy T10, the heaviest T20, now on the market, and AT5, AT10, and AT20, many engineers will ask about the difference between these models and non-AT ah, AT-type tooth type and T-type difference in the bottom of the arc teeth, while the T-type for the full trapezoidal teeth, relative to the transmission of the AT will be more precise a little bit of transmission clearance, of course, the noise will be smaller. The noise will also be smaller. Full arc tooth synchronous belt: HTD3M, HTD5M, HTD8M, HTD14M, HTD20M, arc tooth synchronous belt drive high precision, low noise. Half arc tooth synchronous belt: half arc tooth synchronous belt, also known as high torque synchronous belt, models have, S2M, S3M, S4.5M, S5M, S8M, S14M, this type of synchronous belt is high torque synchronous high precision synchronous belt, of course, the production of high precision, the price is relatively expensive. Precision arc tooth synchronous belt: 1.5GT, 2GT, 3GT, 5GT these kinds of synchronous belts at present domestic manufacturers or very few, mainly imported, the market is not, generally used for high-precision transmission, and imported equipment is common, this type of belt is generally used in automation control equipment. 8YU synchronous belt: also the semi-circular arc tooth synchronous belt, suitable for high-speed transmission, high torque, transmission speed up to 1000rpm/min, generally used in medical equipment. Modified arc tooth synchronous belt: RPP5M, RPP8M tooth type is rabbit tooth type, good turning effect, suitable for high-speed transmission. Generally used in robotic equipment.

    View More 2023-12-12
  • I. Design Guidelines for Synchronous Belt Transmission Synchronous belt transmission is. The teeth of the belt mesh sequentially with the teeth of the pulley to transmit power to achieve the purpose of synchronous transmission. Therefore, when a synchronous belt transmits torque, the belt will be subjected to tensile force, the teeth will be subjected to shear, and the working surfaces of the teeth will be abraded during the process of entering and exiting the mesh with the teeth of the pulley. Therefore, the main forms of failure of the synchronous belt are as follows: (1) The synchronous belt will be worn out during the process of entering and exiting the meshing process with wheel teeth. (1) the fatigue fracture of the synchronous belt-carrying rope (also known as the skeleton rope); (2) the fatigue fracture of the belt-carrying rope (also known as the skeleton rope). (2) Shear rupture of the belt teeth. (3) The working surface of the belt teeth is worn out and loses its original shape. According to the test analysis, when the synchronous belt is around the pulley, in the encompassing arc, the number of teeth of the belt teeth and pulley teeth meshing teeth.2a thousand 6 The shear strength of the teeth is greater than the tensile strength of the belt. At the same time, the wear resistance of the belt teeth is greatly improved by the installation of a nylon wrapping layer adhering to the working surface of the teeth. Therefore, under normal operating conditions, the main form of failure of synchronous belts is fatigue fracture of the belt under variable tensile force. Synchronous belt drives are designed according to the tensile strength of the belt as a design criterion.

    View More 2023-12-12
  • First, the maintenance of the industrial synchronous belt 1, The industrial synchronous belt in transportation and storage should be kept clean to avoid direct sunlight or rain and snow soaking to prevent contact with acids, alkalis, oils, organic solvents, and other substances, and away from the heat device outside one meter. 2, storage warehouse temperature should be kept between 18-40 ℃, and relative humidity should be kept between 50-80%. 3, storage period, industrial synchronous belt shall be placed in rolls, not folded, and placed during the quarter should be turned once. 4, different types and specifications layers of industrial belts should not be connected to use, the joints are used for to glue method. 5, industrial synchronous belt type, structure, specifications, and number of layers should be based on the use of reasonable conditions. 6, industrial synchronous belt running speed generally should not be greater than 2.5 m / s, block size, abrasive materials and the use of fixed unloading device should try to use low speed. 7, the conveyor's drive roller diameter and industrial belt fabric layer relationship, drive roller, reversing roller matching and the requirements of the roller groove angle should be based on the design of the conveyor, a reasonable selection. 8, the feeding direction should follow the running direction of the industrial belt, to reduce the impact of the material falling on the industrial belt should be adopted chute, reduce the material falling distance; the industrial belt receiving section should shorten the roller spacing and the use of buffer rollers for the leakage of material, the belt should be used with a soft moderate baffle, so as not to baffle plate is too hard to scrape the surface of the industrial belt. Second, the use of industrial synchronous belt instructions: 1, avoid the rollers are covered with materials, resulting in rotary failure, to prevent leakage of material stuck between the roller and industrial belt, pay attention to the lubrication of the active part, but shall not be oil stain industrial belt; 2、Avoid starting with load; 3, the industrial belt run off, should take timely measures to correct; 4, found that the tape's local damage should be repaired in time to avoid expansion;

    View More 2023-12-12
  • When installing the rubber timing belt, if the center distance between the two timing pulleys can be moved, you must shorten the center distance of the timing pulleys, and then reset the center distance after installing the rubber timing belt. If there is a tension pulley, relax the tension pulley, then install the synchronous belt, and then install the tension pulley. ② To synchronous belt wheel on the rubber synchronous belt, remember not to force it too hard, or use a screwdriver to pry the rubber synchronous belt to prevent the synchronous belt in the tensile layer of the phenomenon the appearance of imperceptible fracture. When designing the synchronous pulley, it is better to choose the structure so that the two axes can be moved close to each other, if the structure does not allow it, it is better to install the synchronous belt and the synchronous pulley together to the corresponding axis. ③Control the appropriate initial tension. In synchronous belt transmission, the parallelism of the two pulley axes is required to be high, otherwise, the synchronous belt will run out or even jump out of the pulley when working. The non-parallel axis will cause uneven pressure and early wear of synchronous belt teeth. The frame supporting the synchronous belt pulley must have enough rigidity, otherwise, the synchronous belt pulley will cause the two axes not to parallel during operation.

    View More 2023-12-12